Biostimulation low level laser therapy unit. LALA works with point probes, scanning applicators and cluster laser applicator.
Laser Assisted Liposuction Apparatus (LALA)
Biostimulation low level laser therapy unit. LALA works with point probes, scanning applicators and cluster laser applicator.
There are available four types of point probes, two types of scanning applicators and one cluster laser applicator. All applicators have the possibility of adjusting power operation mode: continuous or pulse. The power of laser beam radiation may be set in four phases for point probes and in two phases for scanning and cluster laser applicators. Point probes may operate with optical fiber applicators for which special modes have been developed.
Laser scanning applicators are perfectly applicable in automatic irradiation of larger treatment areas without the presence of physiotherapist.
By choosing one of three modes of radiation (ellipse, line, curves within rectangle boundaries) the therapist can optimally use light source depending on the characteristics of treated area.
It is possible to connect the cluster laser applicator which has got five sources of red and four sources of infrared light radiation. The cluster laser applicator may be operated in a mode with a single source of radiation or in clusters.
Significant advantage is the automatic calculation of treatment time depending on the shape and size of treatment area. The therapist has to only set the distance between the scanning applicator and patient’s body.
The unit gives the possibility of connecting two point probes and one scanning applicator or cluster laser applicator simultaneously.
The use of the unit is improved thanks to the gas spring that counterbalances weight of the scanning head. The scanning head can be set in two axes so its position can be easily adjusted to the treated area.
SPECIFICATION
LASER THERAPY
- cooperation with: scanning applicators, cluster laser applicator and point probes
- power adjustment
- operation modes: continuous and pulse
- duty cycle or pulse time setting
- automatic treatment time calculation on the basis of treatment area
- dedicated modes for operation with optical fiber applicators
SCANNING APPLICATOR (optional)
- high power of emitters measured on output
- two versions with different powers
- 2-level power regulation
- three ways of plotting the treatment area: ellipsis, line and curves within a rectangle boundaries
- adjustment of the arm height: 60 – 140 cm
- setting of the scanning head in two axes
- automatic determination of treatment time depending on the size of treated area
- pneumatic actuator that holds the arm
- high quality wheels with brakes
- shelf for controller and protective goggles
POINT PROBES (optional)
- diversified power 40 mW and 80 mW for 660 nm,200 mW and 400 mW for 808 nm
- 4-level laser power adjustment
- power stabilisation of the laser beam radiation
- readiness rate and work signalization
- dedicated mode for operation with optical fiber applicators
CLUSTER LASER APPLICATOR (optional)
- opportunity to operate with different modes: cluster R 5x40mW, cluster IR 4×400, cluster R+IR 5×40 mW + 4×400 mW
- regulation of treatment parameter
MANUAL MODE
- complete control over parameters for advanced users
TREATMENT PROGRAMS
- simplification of the unit operation
- treatment programs chosen by name
- 30 programs for point probe IR
- 20 programs for point probe R
- 50 user-defined programs
- 8 programs with Nogier frequency
- 30 programs with Voll frequency
TREATMENT SEQUENCES
- simplification of the unit operation
- treatment programs chosen by name
- 30 programs for point probe IR
- 20 programs for point probe R
- 50 user-defined programs
- 8 programs with Nogier frequency
- 30 programs with Voll frequency
TREATMENT SEQUENCES
- simplification of the unit operation
- 10preset sequences for point probes
- 25 preset sequences for scanning applicators
- 55 sequences for cluster laser applicator
